SUPERCONSOLE 1000 and SUPERSET 7000 consoles:

To set the date or time:

• Press Function.
• Press Att Function.
• Press DateTime.
• Press Set Date.
• Do one of the following:

-To set a date, press Set Date and enter the date (YY-MM-DD).

-To set a time, press Set Time and enter the time in 12 or 24

format (press PM if required for 12 hour format).

• Press Set.
• Press Exit.

To choose 12- or 24-hour time format:

• Press Function.
• Press Att Function.
• Press DateTime.
• Press 12/24 HR.CLK.

When AM or PM appears in the display, the system is in 12-hour format.

• Press Exit.

 

SUPERSET 7DN and SUPERSET 700 consoles:

To set the date and/or time:

• Press CMND.
• Type DATE followed by the date (DATE YYYY-MMM-DD).
• Press Enter.

To set the time:

• Press CMND.
• Type TIME followed by the time (TIME HH:MM:SS X)

X is either A or P if you are using 12-hour format.

• Press Enter.

To set both the date and time:

• Press CMND.
• Type DATE followed by the date and time

(DATE YYYY-MMM-DD HH:MM:SS)

• Press Enter.

To choose 12- or 24-hour time format:

• Press CMND.
• Do one of the following:

-To choose 12-hour format, type Set Clock 12 (or S C 12).

-To choose 24-hour format, type Set Clock 24 (or S C 24).

• Press Enter.